Back in Black - a DIY raspberry pi Boombox: Inspiration





One of the items on my geek bucket list has been to build my own version of a boombox. The boombox was introduced by Philips in 1969. Refinements were introduced by Japanese manufacturers and introduced to the US in the 70's. They became a hit with urban youth. By the 80's, boomboxes had reached an age of gigantism - bigger, blasty, bassy. See the Wiki for det's.

My desire was to build a box that echoed back to the old school days, but took modern design cues. I wanted a box that looked good, sounded good (well, loud, anyway) and I could customize easily.

As a prototype, I built the Day & Night Sampler, a little music player in a re-purposed tin box. The "Back in Black" (BinB) Boombox started with what I learned in that build and grew from there. This was a journey, where I made several prototypes to visualize what I thought the boombox needed.

I reached a point where I was happy with the basic frame of the BinB, but it was missing something - the magic something i like to call 'minimal viable blinkenlights'. It just had to have flashing LEDs.

I had read (and experimented with) John Boxall's tutorial on using the Sparkfun Spectrum Shield. The Spectrum Shield works with an Arduino to display two channels of 7 audio frequency bands each. I used a VFD to test the Spectrum Shield display. It worked, but not very dramatic.

About this time, I saw the work of David J. Watts on Adafruit's Show & Tell Hangout. David presented a very creative small boombox.  His used the MSGEQ7 IC, which is also the heart of the Spectrum Shield, to display the frequency bands on a matrix of LEDs. Hmn... John Boxall showed how to do that with a Freetronics Dot Matrix Display, also an LED matrix. "What a minute! I have a Sure 0832 LED matrix someplace in inventory...[rummages around for awhile]... Yeah, here it is. I can use that to look like the graphic equalizer on old boomboxes."

But it was still missing... something. Well, what if I put in some Adafruit Neopixel Rings where the tweeters would normally go on a boombox? Googled around a bit and discovered the work of Chris Wilson on youtube, using an Adafruit Neopixel Strip as a VU Meter.  Perfect. A few easy tweaks to Chris' code and I had Neopixel rings bumpin' in blue to the beat.

And the name... What could be more iconic of an era than the 1980 release of "Back in Black" by AC/DC? Plus, my boombox was black... REALLY black... extreme GLOSSY black. 

Bill of Materials - Next










Comments

Post a Comment

Popular Posts